Low-Density, One-Component Edge and Void Fillers
Heat curing, off-white, one-component, frozen epoxy paste suitable for service temperatures up to 350 ºF (177 ºC). Used for insert potting, edge filling and reinforcing honeycomb core.
Heat curing, off-white, one-component, frozen epoxy paste suitable for service temperatures up to 350 ºF (177 ºC). Used for insert potting, edge filling and reinforcing honeycomb core.
Unit of Measure
Typical Properties
Original Equipment Manufacturer (OEM) Specifications |
N/A Pratt and Whitney PWA 36757, REV C |
Consistency at 77 Degree Fahrenheit (ºF) Temperature |
N/A Paste |
Gel Time at 77 Degree Fahrenheit (ºF) Temperature |
N/A 8 hrs (100 gram mass) after thaw minutes |
Suggested Cure Schedule Fahrenheit (ºF) |
N/A 1 hr at 350 ºF or 1.5 hrs at 250 ºF |
Maximum Service Temperature |
N/A 350 ºF |
Compressive Strength at 77 Fahrenheit (ºF) |
N/A 9000 psi |
Flame Retardant |
N/A No |
Packaging |
N/A Patties |
