Integral Products, Inc.
Integral Products, Inc.
24045 Frampton Avenue
Harbor City, CA 90710
Ph: (310) 326-8889
Fax: (310) 326-7751
Email: info@integralproducts.com
Website: www.integralproducts.com
Print Back
Low-Density, One-Component Edge and Void Fillers

Non-flow, off-white epoxy void filler with a 30-day work life at room temperature. Requires elevated temperature cure and can be co-cured with composites in 90 minutes. Used for insert potting and blocks in honeycomb panels.
Unit of Measure

Typical Properties

Original Equipment Manufacturer (OEM) Specifications

 N/A Boeing BMS 5-28, Ty 10, REV AN / C&D Aerospace CDM212-00, Ty 13, REV J Heath Tecna C2-001, Ty 2, CLI GRA REV M

Consistency at 77 Degree Fahrenheit (ºF) Temperature

 N/A Non-flow paste

Gel Time at 77 Degree Fahrenheit (ºF) Temperature

 N/A 30 days after thaw minutes

Suggested Cure Schedule Fahrenheit (ºF)

 N/A 1 hr at 260 ºF

Maximum Service Temperature

 N/A Not Determined

Compressive Strength at 77 Fahrenheit (ºF)

 N/A 2400 psi

Flame Retardant

 N/A Yes

Packaging

 N/A Working packs and pails

Specifications

Density

 N/A 0.50 g/cm³

Color

 N/A Off-White