Integral Products, Inc.
Integral Products, Inc.
24045 Frampton Avenue
Harbor City, CA 90710
Ph: (310) 326-8889
Fax: (310) 326-7751
Email: info@integralproducts.com
Website: www.integralproducts.com
Print Back
Low-Density, Two-Component Edge and Void Fillers

Toughened, viscous brown epoxy paste that can resist cracking even when exposed to impact and vibration. Used for core filling, edge sealing, bushing and fastener potting in honeycomb structures.
Unit of Measure

Typical Properties

Original Equipment Manufacturer (OEM) Specifications

 N/A Boeing BMS 5-28, Ty 26, Cl 2, REV AN / Spirit SMS 116201, Ty 3, REV H

Consistency at 77 Degree Fahrenheit (ºF) Temperature

 N/A Paste

Gel Time at 77 Degree Fahrenheit (ºF) Temperature

 N/A 12 (77 gram mass) minutes

Mix Ratio by Weight (R:H)

 N/A 100:54

Suggested Cure Schedule Fahrenheit (ºF)

 N/A 7 days at 77 ºF or 2 hrs at 160 ºF

Note for Suggested Cure Schedule

 N/A Cure may be accelerated with heat.

Maximum Service Temperature

 N/A Not Determined

Flame Retardant

 N/A No

Packaging

 N/A 400 ml cartridge

Specifications

Density

 N/A 0.69 g/cm³

Color

 N/A Brown